For the corrugated board carbide cutting blades, what are the problems normally we meet? How are the problems caused? Here you can find the answer:
Problem 1: Life Span is short
Caused 1: Is the grain size of the grinding wheel proper? Too coarse grain size will cause short working time.
Caused 2: Frequent grinding, long grinding time, high grinding pressure.
Problem 2: The edge of corrugated boards are with burr and dent After cutting
Caused 1: The blade isn't sharp.
Caused 2: The corrugated board is too wet.
Problem 3: The carbide cutting blades are crack
Caused 1: Improper Assembly.
Caused 2: After assembly well, prohibited any improper tough with the blades.
Caused 3: Unstable swing of grinding wheel will make the blades cracked due to the bearing of grinding wheel damaged.
Caused 4: Accidentally hit the blades and cracked.
Problem 4: Chips on the cutting edge after grinding
Caused 1: Unstable swing grinding wheels may cause the chip issue, even if the blades are broken.
Caused 2: The improper tough may cause the chips on the cutting edge.
Problem 5: The edge of corrugated board isn't straight
Caused 1: The material of the carbide cutting blades aren't suitable for the corrugated board.
